Modern Quilts, Home Decor, and Handcrafted Clothing

Straight Line Quilting

Pin Basting : Fresh Lemons Quilts

A quick post today to show that I have not been lazing around, but am truly working on finishing up my next quilt. I always procrastinate when it’s time to baste because I really just do not enjoy it. With small items like pillows, I spray baste. But when it comes to quilts, I just don’t get the same finish quality as when I pin baste. But I do know others that have great success with spray basting, so I always say you should do what works best for you.

Straight Line Quilting : Fresh Lemons Quilts

I had always planned on doing straight line quilting on this one. When I received the Bernina 750, I knew it didn’t come with a walking foot. I asked during my training if I could use the walking foot from my 440 with it and found out yes, I could. But I might not want to because the 750 has a dual feed system that can be used for straight line quilting.

I will go ahead and tell you that in my head I thought “SURE. Right. There is NO.WAY. the dual feed can compare to the walking foot when it comes to quilting.” You see, I love the walking foot on my 440. The first time I used it after buying that machine, it was like the clouds parted and the sun shined directly on me. :)

Then, at quilt guild last week, my friend Catherine assured me that the dual feed on the 750 works great for quilting. Yep, I was still skeptical because I am really stubborn like that.

Straight Line Quilting : Fresh Lemons Quilts

So I thought I would do a little test. I set up my machine with the dual feed. I followed the recommended pressure foot settings for quilting from my manual. You can see on the screen above, I changed the pressure from 50 (the default) to -10, as recommended. I switched my needle to a 90/14 Machine Quilting needle and got to work. I stitched a line with the dual feed setup. Then I switched to my walking foot. Below, the dual feed line is on the left and the walking foot line is on the right.

Straight Line Quilting : Fresh Lemons Quilts

Ok, here it goes. I.Was.Wrong. Yep, the dual feed did an amazing job! And not so much the walking foot. I will say once I saw how good the dual feed was doing, I didn’t spend a ton of time tweaking my settings to try to make the walking foot look as good (messing with pressure foot settings and such).

*** Update *** This morning I spent some time testing settings again with the walking foot. With the right settings, the walking foot worked great, just as nicely as the dual feed. Below is a photo and the settings I used.

Fresh Lemons Quilts

Fabric and batting: Art Gallery Pure Elements Solid / Quilter’s Dream Cotton Request Loft
Dual Feed: Stitch Length 3.0 / Foot 1D / Foot Pressure -10
Walking Foot: Stitch Length 3.0 / Bernina Walking Foot / Foot Pressure 55

You can see the main difference is the pressure foot settings. I decreased it significantly from the default setting of 50 for quilting with the dual feed. I increased it just slightly for the walking foot. (This will depend on your type of fabric and batting. I use a very low loft batting.)

So there you go! Now I have the option of using both the walking foot AND the dual feed – I just need to check and double check my settings before getting started.

Straight Line Quilting : Fresh Lemons Quilts

So I’m going to spend much of today continuing with my straight lines. Over and over again. It always takes longer than I remembered, but it’s turning out great!

Tagged as:  · · ·

40 Responses to “Straight Line Quilting”

  1. 1

    Ok…good for your for admitting you weren’t right :) Can’t wait to see this quilt!

  2. 2
    Carol says:

    I was glad to read your post this morning, as I have had exactly the same experience with the dual feed on my 750. I had always been so happy with the walking foot when quilting with my 160, but I find that I can keep my lines straight more easily with the dual feed than with the walking foot. And by the way, thanks for all of your blog posts; I always enjoy reading them.

  3. 3
    Liz Blois says:

    This is so helpful in case I am ever able to upgrade my Bernina, its only a baby one.thank you

  4. 4
    Karen says:

    straight line quilting is the only way I do machine quilting – of course as a hand quilter I don’t do a lot of machine quilting but straight line is the only way that is closest to what I like!

  5. 5
    Lynne Tilley says:

    I love the colors and the fabric pattern of this new quilt. I can’t wait to see it all finished. Wow on the dual feed! I adore my walking foot too. I wouldn’t have believed it either. :)

  6. 6
    Susan G says:

    I also appreciate these task specific reviews of the the Bernina 750. Coming from someone whose word I trust and whose work I admire, they are invaluable.

  7. 7
    Suzy Quilter says:

    Such nice straight lines _ _ _ _ _ what do you use for a guide? There are no markings.

    • 9
      Faith says:

      Hi Suzy! I just use the edge of my walking foot. I’m typically too lazy to mark anything. :) Also, I always start at a seam line that is (hopefully!) pretty straight. :P

  8. 8
    Diane says:

    Ohhh, thanks for this info! I have the 750 and never bothered to check the manual for settings for quilting — always just grabbed the walking foot. I’ll be giving the dual feed a shot. By the way, I love the quilt you’ve got in the works!

  9. 10
    Camille Duridas says:

    I have the Viking Designer One and am not familiar with the dual feed, any advice?

    • 14
      Faith says:

      Hi Camille,

      The dual feed is a mechanism that feeds the fabric from the top, similar to what the feed dogs are doing from the bottom. If your machine doesn’t have the dual feed, you can still get great results with your straight line quilting. (I haven’t had dual feed the last 5 years). Make sure to use your walking foot if you have one. Also, make sure you don’t have too much pressure on your fabric, that will cause it to get bunched up and create puckers on the back of your quilt. You probably have some way on your machine to adjust the pressure, check your manual and it should tell you.

  10. 11
    katie says:

    I am more encouraged to give straight line quilting another go. thanks for the tips

  11. 12
    Dana Henry says:

    I am so excited over your “New” Bernina. It’s going to be my retirement machine!!!

  12. 13
    Gertie says:

    Wow that dual feed rocks! Love straight line quilting – this is going to be just lovely when it’s all quilted x

  13. 15
    Rori says:

    I have the 750 also and I have used the walking foot for straight line quilting. I love the dual feed for piecing and I didn’t even think about checking the manual to adjust the settings!!! You are so clever! And THAT is why they are letting you “test drive” if for awhile. I suppose if you wanted to stitch lines farther apart then your foot, you would use the walking foot’s guide or mark your quilt. Have you thought of another way to get wider lines?

  14. 16
    Janet Moilanen says:

    I think the Janome Accufeed is similar to your Dual Feed on your Bernina. I too get better results than with a walking foot. It’s nice to be able to make adjustments to top & bottom feed when needed!

  15. 17
    ina says:

    That is awesome! ;p

  16. 18
    Brenda Smith says:

    Have you ever tried Hobbs Fusible 80/20 batting? It’s awesome. I never pin baste anymore. It changed my life! I just iron the top to the batting then turn it over and iron the back on. It’s not a permanent bond so you can lift up iron again or iron out any puckers before quilting. I have had a few quality issues with it not sticking occasionally so I pin in those spots if necessary but all in all THE greatest thing. I quilt for customers on my domestic machine and would never have the time to pin baste all those quilts.

  17. 19
    Jill says:

    Maybe I should read the manual…I have the two machines you have, and have not had good luck straight line quilting with the dual feed. So, I retreated to the walking foot. I will try again with the suggested settings, and thank you for posting.

  18. 20
    Anne says:

    This is really good to know. Maybe some day if I can get a new machine I’ll look for this. I have a very old Bernina right now and use a walking foot. Interesting the difference.

  19. 21

    Amazing the difference! You say you were wrong, but you were right to try them both. Now you are wise! Good luck with those lines. Intense! But they look sew good!

  20. 22

    I’m a sucker for straight line quilting. I can’t wait to see how this turns out. It’s very interesting to hear your thoughts on the sewing machine.

  21. 23

    Wow that is quite a difference. I’ve just upgraded machines and have a new love for my walking foot, so I think I would have been sceptical too if I hadn’t seen your pic :)

  22. 24
    Carla says:

    Oh dear! Now I want a new Bernina sewing machine with a dual feed!

  23. 25
    jenni says:

    Every post since you got that new Bernina is tempting me! That thing is amazing. All those yellow fabrics s\look so good together, I might have to go and make myself a yellow.

  24. 26

    So glad you tried it! Did you use a 20D or the 37D? So many options await you:)

  25. 28

    I love straight line quilting…thank you for the inspiration…I would love to have a Bernina!

  26. 29

    I just got my 750QEE 2 weeks ago and I love it. I did use the dual feed quilt for a small art piece and it worked fine – I didn’t even change the pressure setting – I guess I should have read the manual. I have also used my walking foot from my 640 and it worked just fine too. I am following you on Facebook now so I can follow your journey with your 750.

  27. 30
    Phyllis Moynihan says:

    Thanks for the demonstration of straight line quilting. I really need to try it out. Also, thanks for the great giveaways!

  28. 31
    Michelle in NH says:

    Great review of the dual feed and straight-line quilting! As a new owner of an Bernina 750, I’m looking forward to your adventure exploring your new machine. Thank you!

  29. 32
    Shaeon Kalmes says:

    I have just purchased the 750QE. I have been looking where you found the changes to straight quilting with dual feed. I am looking forward to getting instructions on the machine. I am just getting acquainted until my classes are scheduled. But have not found anything in the instructions on changing pressure or needle.
    Thanks
    Sharon

    • 33
      Faith says:

      Hi Sharon! To change the presser foot pressure, press the “i” icon on the screen, next to the picture of the stitch that you are currently sewing. Sort of in the middle of the screen. This is where a lot of the stitching settings are located. Touch the icon now that looks like a presser foot with a weight on top of it. Then you will get to the screen I show in the blog post. If you turn your dial, it will adjust the pressure.

      For changing the needle, you need to use a little tool that came with your machine to unscrew it. I’m sure they will go over that in your class. :)

  30. 34
    CJ says:

    I think I would miss the bar attachment on the walking foot for varied distances. Wish it could have be incorporated into the dual feed foot.

    • 35
      Faith says:

      Hi CJ – there is a bar that you can slide through the foot when you dual feed as well. The foot I was using (1D) has holes in it and a tightener and the machine comes with a bar. Let me see if I can upload a photo into this comment for you. :)

  31. 36
    Adele says:

    Faith, when you straight line quilt, so you start with quilted line in the middle and work outward toward the end or do you quilt one end to the other? I usually stipple all over but would love to get the straight line thing happening! Thanks

  32. 38
    Jacqueline says:

    I bought my Bernina 750 QE about a year ago and consider it a waste of thousands of dollars. It has never sewn a straight and even line. Shop where purchased has been no help at all. Obviously I have a dud as yours seems to work a dream!

    • 40
      Faith says:

      I’m so sorry to hear you are having trouble with your machine Jacqueline! I see you are in Australia, I would encourage you to contact Customer Service at Bernina of Australia and talk to them about your machine and dealer concerns.

  33. 39
    Glenda says:

    I am a novice quilter and am not quite understanding your process. Do you start in the middle of the quilt at the edge of the fabric and work all the way down to the other edge or do you start in the middle and work from the middle to the edge of the fabric and then go back to the middle and continue sewing in the other direction?

Leave a Comment

I try to keep this blog a happy place - please only leave comments that are positive and encouraging to others. Negative/disparaging comments will be deleted. :)