Summer Sampler Series : Rocky Road to Kansas

SSSLogo-Rocky-Road-to-Kansas.jpg

Our eleventh quilt block for the Summer Sampler Series is the Rocky Road to Kansas. It can be found in Chapter 16, Page 361, Block 2979 of Barbara Brackman’s The Encyclopedia Of Pieced Quilt Patterns.

Some quilt blocks are named after the time or event when they first appeared. The Rocky Road to Kansas is such a block, referring to the period of early settlers in late 1800's and their difficult traveling conditions.

I loved this block as soon as I saw it. One of the first quilts I made was a string quilt, and it felt so "modern" and "hip" to me. Well this quilt block just shows that strip and string quilts are not a new design, but have been around for a long time. They were used as a way to use up leftover fabric scraps, let nothing go to waste. So go ahead, channel your inner pioneer, and let's get started on the Rocky Road to Kansas!

Rocky Road to Kansas Quilt Block Tutorial

Please note, all seams are 1/4″; Final block size 12.5″ unfinished

Reduce your stitch length so that the paper template will perforate easily. I used 1.5 stitch length.

Paper Piecing Templates - Print 4 of the Paper Piecing Template below. Be sure to print them at 100% and check the scale icon with a ruler before starting.

Rocky Road to Kansas Paper Piecing Template

Prepare the templates. Cut out the templates around the seam allowance line.

RRTK01.jpg

Step 1. Cut your fabric. When cutting fabric for paper piecing, you will be cutting rectangles that will be larger than needed.

I recommend cutting 1 of each piece below, making a block, and ensuring it is enough fabric for your sewing style. Then you can make adjustments later for the rest of your blocks. These are the fabric sizes I used for my paper piecing.

Pattern Piece Fabric Color
1 - Star Cut 4 6" x 7.5” Strips sewn together to required size* -or- single piece of fabric cut to size
2 - Background Cut 4 4” x 7.5” White
3 - Background Cut 4 4” x 7.5" White
4 - Center Square Cut 4 3.5” x 5.5” Purple

* I decided to go for the scrappy look, so I cut strips 6" long, and random widths ranging from 1.25" and 2".

Step 2. If you cut strips for your star, sew the strips together until they are 7.5" tall.

Step 3. Take your fabric cut for Piece 1 and place it right side out on the back of your template, making sure to cover the entire template space 1. Pin into place.

RRTK02.jpg

Step 4. Take your fabric cut for Piece 2. Place it right side together to Piece 1 which you pinned into place in Step 3. Hold your template up to the light and make sure at least 1/4″ of the fabric overlaps into template space 2.

RRTK03.jpg

Step 5. Sew along the seam line on the template between pieces 1 and 2. Remove your pins.

RRTK04.jpg

Step 6. Flip your block over. This is what your seam will look like.

RRTK05.jpg

Trim your seam allowance to 1/4″.

RRTK06.jpg

Press your fabric open.

RRTK07.jpg

Step 7. Repeat this process and sew background piece 3 and center square piece 4 into place.

RRTK08.jpg

Step 8. Turn your block over and trim the excess fabric from around the template. Before trim:

RRTK09.jpg

After trim:

RRTK10.jpg

Step 9. Now repeat these steps for the other 3 templates. Once you have all four squares pieced, remove the paper from the back. This should perforate easily as long as you remembered to shorten your stitch length before sewing.

RRTK11.jpg

Step 10. Sew your squares together to create your quilt block. You're done!

RRTK12.jpg