Welcome to week 2 of the Solstice Stars Series! Today we will be making the Whirling Star. This star is from Barbara Brackman’s book The Encyclopedia Of Pieced Quilt Patterns,page 310 and the original source of the design is attributed to Nancy Cabot.
This block will be our first paper pieced block of the series. Some of you may now need to take a few deep calming breaths. I promise you, YOU can do it! I have taken lots of photos for the tutorial and we will be going through every step.
If you are completely new to paper piecing, I recommend reading through this tutorial and even making the sample block. It will really give you a basic understanding. And hopefully put your mind at ease. Second, I recommend reading through the entire tutorial for today’s block before starting. And finally, take your time making this one. We will be paper piecing 6 small blocks and then piecing those together.
Whirling Star Quilt Block Tutorial
Please note, all seams are 1/4″; Final block size 12.5″ unfinished
Reduce your stitch length so that the paper template will perforate easily. I used 1.4 stitch length.
Paper Piecing Templates
Print 2 of Template A below and print 4 of Template B below. Be sure to print them at 100% and check the scale icon with a ruler before starting.
|Template A||Template B|
Prepare the templates. Cut out the templates around the seam allowance line. Here is a visual of what we are going to make with our templates:
Note: I updated the templates a bit after taking the photos. Your templates specify “A” and “B” on them, which will help you out during the directions.
Step 1. Cut your fabric. When cutting fabric for paper piecing, you will be cutting rectangles that will be larger than needed.
I recommend cutting 1 of each piece below, making a block, and ensuring it is enough fabric for your sewing style. Then you can make adjustments later for the rest of your blocks. These are the fabric sizes I used for my paper piecing.
|1A||Cut 2||4.5″ x 5.5”||Print/Color|
|2A||Cut 2||4.5” x 5.5”||White/Background|
|3A||Cut 2||4.5″ x 5.5”||Print/Color|
|4A||Cut 2||4.5” x 5.5”||White/Background|
|5A||Cut 1||4” x 4″,
|6A||Cut 1||4″ x 4”,
|1B||Cut 4||4.5” x 5.5”||Print/Color|
|2B||Cut 4||3.5” x 7″||White/Background|
|3B||Cut 4||3.5” x 7″||White/Background|
Tip: I like to write the fabric color name on the template pieces so I don’t get confused as I’m sewing. Yes, I’m easily confused.
Step 2: Let’s start with Template A. Take your fabric cut for Piece 1A and place it right side out on the back of your template, making sure to cover the entire template space 1A. Pin into place.
Step 3: Take your fabric cut for Piece 2A. Place it right side together to Piece 1A which you pinned into place in Step 2. Hold your template up to the light and make sure at least 1/4″ of the fabric overlaps into template space 2A. This will probably feel backwards and wrong the first few times you do it. Pin into place.
Step 4: Sew along the seam line on the template between pieces 1A and 2A. Be sure to also sew into the grey seam allowance. Remove your pins.
Step 5: Flip your block over. This is what your seam will look like.
Trim your seam allowance to 1/4″.
Your block should now look like this:
Press your fabric open.
Step 6: Take your fabric cut for Piece 3A. Place it right side together to Piece 1A and 2A which you have sewn into place. Hold your template up to the light and make sure at least 1/4″ of the fabric overlaps into template space 3A. Pin into place.
Step 7: Sew along the seam line on the template.
Step 8: Trim along seam allowance:
Step 9: Using the same technique, continue and sew on pieces 4A, 5A, 6A, in that order. Your paper piecing template should now look like this:
Step 10: Turn your block over and trim the excess fabric from around the template.
You can see that some of my fabric was a bit too short. Ideally your fabric will cover the entire template.
Congratulations! You’ve made your first paper pieced block!
Step 11: Now repeat these steps for the second Template A.
Step 12: Let’s move on to Template B. I will do a quick walk through to get you started. Take your fabric cut for Piece 1B and place it right side out on the back of your template, making sure to cover the entire template space 1B. Pin into place.
Step 13: Take your fabric cut for Piece 2B. Place it right side together to Piece 1B which you pinned into place in Step 12. Hold your template up to the light and make sure at least 1/4″ of the fabric overlaps into template space 2B. Again, this will probably feel backwards and wrong the first few times you do it. Pin into place.
Step 14: Sew along the seam line on the template between pieces 1B and 2B. Be sure to sew a bit into the seam allowance. Remove your pins.
Step 15: Press your fabric open. Continue paper piecing piece 3B.
Step 16: Press your fabric open. Trim your template, just as you did with Template A.
Step 17: Repeat and create the other 3 Template B’s.
Step 18: You now have all 6 templates pieced you need to create the star! Here’s the layout:
Remove the paper from the back. This should perforate easily as long as you remembered to shorten your stitch length before sewing.
Step 19: Sew your 2 Template A’s together. Align the middle seam to ensure the center points align when you sew the block together.
Step 20: Now we will sew the 4 Template B’s to the corners to finish the block. Line up your seams again.
After sewing all the corners to the center block, you’re done! You should have a beautiful Whirling Star!
January 25, 2012 53 Comments
Welcome to the Solstice Stars Series! Today is the first week of a series of five star quilt block tutorials. Our first block is the Ribbon Star. This star is from Barbara Brackman’s book The Encyclopedia Of Pieced Quilt Patterns,page 160 and the original source of the design is unknown.
Ribbon Star Quilt Block Tutorial
Step 1. Cut your fabric:
|Pattern Piece||Fabric Color|
|Background Corners||Cut 4||3.5” x 3.5”||White|
|Background Half Square Triangles||Cut 6||4” x 4”||White|
|Top Left Points||Cut 2||4” x 4”||Blue|
|Top Right Points||Cut 2||4” x 4”||Purple|
|Bottom Left Points||Cut 2||4” x 4”||Red|
|Bottom Right Points||Cut 2||4” x 4”||Green|
Take all of your 4″ x 4″ squares and cut them diagonally into half square triangles. Set aside one of each of your blue, purple, red and green half square triangles. You will only need 3 of each color for your star.
Step 2. Sew each of your remaining 12 colored half square triangles to your 12 background/white half square triangles, creating 12 squares.
Step 3. Trim your squares to 3.5″.
Tip: I like to use a small quilting ruler with a diagonal line, and line that up with the seam. I then trim the top and right of the block. Turn the block 180 degrees and line up the seam again. Trim the remaining sides of the square to 3.5″.
Lay out your resulting squares into the design of the quilt block, using your 3.5″ background/white fabric for the corners.
Step 4. Sew your squares together. You’re done!
Don’t forget to post pictures of your finished blocks, as well as any questions, in the Flickr group!
January 18, 2012 37 Comments
Last week I asked for suggestions as to what you would like to see more of on my blog this year. There were lots of great suggestions: quilting basics, color/fabric selection process, smaller projects, sewing with kids. But I think the most requested idea was more quilt-alongs and tutorials.
I have had it in my head for quite some time to make a quilt out of various stars. I decided to incorporate this idea into a series of tutorials so we can all learn together! Over the next five weeks, I will be posting five star quilt block tutorials. Maybe you want to just use this as a skill builder? (There will be paper piecing and probably even some y-seams…both of which are not as scary as they sound and you can find tutorials for them here.) Maybe you want to make a quilt out of one of the stars, repeating? Maybe you want to use all five in a quilt? Maybe you want to add these to other star blocks tutorials online and create a star sampler quilt?
Lots of options! I hope you will join me and we can all learn something new. The “Solstice Stars Series” tab at the top of the blog will contain links to all the tutorials as well as buttons for you to grab for your blogs.
Tutorials will be posted everyday Wednesday, beginning January 18th and ending on February 15th. Finished blocks can be added to the Fresh Lemons Quilts Flickr Group. I will also use the discussion in the Flickr group for any questions. I hope you are as excited as I am!
January 12, 2012 60 Comments
We are in the second to last month of the Twice Around the Block Virtual Quilting Bee, and this month Sarah asked us to make star blocks. She sent fabric from an out of print Anna Maria Horner collection called Bohemian. I decided to use the same layout I used this summer in my Wonky Little Star Quilt, only this time I made Friendship Stars. I’ve heard this layout now referred to as “interlocking stars” and I think that’s a great description. I’ve really enjoyed seeing them pop up all over.
I had a lot of questions after that quilt regarding how to layout the fabric squares to achieve the look. I created a little diagram…
It’s the same layout as a Plus Quilt, where you start with the blocks in the middle and work your way out to the edges.
Next month is my turn to send out fabrics for the bee, so I am hoping to come up with a final plan over the next two days. If only there were more hours in the day!
December 22, 2011 12 Comments